Angiogenesis biomarkers detection on a polymeric 3D printed device

Authors

  • Gianluca Palmara Department of Applied Science and Technology, Politecnico di Torino, Turin
  • Alessandro Chiadò Department of Applied Science and Technology, Politecnico di Torino, Turin
  • Annalisa Chiappone Department of Applied Science and Technology, Politecnico di Torino, Turin
  • Fabrizio Pirri Department of Applied Science and Technology, Politecnico di Torino, Turin; Sustainable Future Technologies @Polito, Istituto Italiano di Tecnologia, Turin
  • Ignazio Roppolo Department of Applied Science and Technology, Politecnico di Torino, Turin
  • Francesca Frascella Department of Applied Science and Technology, Politecnico di Torino, Turin

DOI:

https://doi.org/10.4081/bse.186

Keywords:

Biochemical functionalization, biosensors, 3D-printing, ELISA

Abstract

Polymeric 3D printed chips with intrinsic tuned functionalities were produced and employed for the detection of angiogenesis biomarkers.

Downloads

Download data is not yet available.

References

Downloads

Published

29-09-2021

Issue

Vol. 2 No. 1 (2021)

Section

Communications

License

Copyright (c) 2021 The Authors

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.

How to Cite

Angiogenesis biomarkers detection on a polymeric 3D printed device. (2021). Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.186