Light-based 3D printing of functional polydimethylsiloxane- based microfluidic chips

Authors

  • Gustavo A. Gonzalez Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, Turin; Center for Sustainable Futures @Polito, Istituto Italiano di Tecnologia, Torino; Italian Association for Industrial Research (AIRI), Rome
  • Annalisa Chiappone Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, Turin
  • Kurt Dietliker Department of Chemistry and Applied Biosciences, ETH Zurich
  • Pirri C. Fabrizio Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, Turin; Center for Sustainable Futures @Polito, Istituto Italiano di Tecnologia, Torino
  • Ignazio Roppolo Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, Turin

DOI:

https://doi.org/10.4081/bse.171

Keywords:

3D printing, microfluidic, functionalization, photopolymerization, silicone

Abstract

The objective of the work is to fabricate and functionalize 3D printed PDMS-based microfluidic chips through digital light processing DLP-3D printing.

Downloads

Download data is not yet available.

References

Downloads

Published

29-09-2021

Issue

Vol. 2 No. 1 (2021)

Section

Communications

License

PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.

How to Cite

Light-based 3D printing of functional polydimethylsiloxane- based microfluidic chips. (2021). Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.171